The 140-SP features Spin/Pull action, along with 3,057 lbs. of pulling force, in a smaller tool. Easy installation in seconds. Comes supplied with inch mandrels and nosepieces 6-32″ through 1/4-20″ conveniently stored in a durable carry case. Mandrels and nosepieces for 4mm through 6mm can be purchased separately. The 140-SP can set thread sizes from 6-32 through 1/4″-20 and 4mm through 6mm in aluminum or steel.

• The 140-SP spin/pull action in a smaller tool
• Just hold the rivet nut onto the mandrel end and engage the tool with automatically spin the nut on
• Insert the rivet nut in the hole and pull the trigger to set the fastener
• Then toggle to the bottom trigger and reverse spin the mandrel off
• Easy installation in seconds
• Sets #6-32 through 1/4-20 and M4 through M6 diameter threaded inserts

For moderate to high volume use. – 85-95 PSI

Rivet Types: Threaded Inserts

Rivet Diameters: 6-32 through 1/4”-20 Aluminum or Steel

Stroke: Adjustable

Weighs 4.9 lbs (2.22kg)

Manufacturer: Marson / FAR – Made in Italy

Marson 140-SP Manual

Marson Tool Brochure 7